PCM G-75H Drivehead
Hydraulic gear PCP surface drivehead solutions.
PCM and Canadian subsidiary Amik Oilfield Equipment & Rentals provide a cost effective drivehead solution for your hydraulic power requirements.
Benefits of PCM Drivehead G-75H
- Robust and safe hydraulic gear drivehead
- No sheave and belts
- Low maintenance requirement
- Integral hydraulic pressurized stuffing box with oil circulation - Amik "bill cayford" patented
- Gearbox rated 6000 lbs torque
- Flexible coupling shaft
Performances of PCM Drivehead G-75H
Hydraulic motor
Calculated @ 1500 RPM - prime mover @ 100% efficiency
- Hydraulic motor Rexroth 80 cc / Hydraulic pump Rexroth 71cc
- Ratio: 4.1
- Max speed: 320 rpm
- Max torque at 3000 psi: 810 ft.lbs
- Max torque at 4000 psi: 1070 ft.lbs
- Hydraulic motor Rexroth 107 cc / Hydraulic pump Rexroth 71cc
- Ratio: 4.1
- Max speed: 240 rpm
- Max torque at 3000 psi: 1070 ft.lbs
- Max torque at 4000 psi: 1430 ft.lbs
- Hydraulic motor Rexroth 80 cc / Hydraulic pump Rexroth 100cc
- Ratio: 4.1
- Max speed: 460 rpm
- Max torque at 3000 psi: 810 ft.lbs
- Max torque at 4000 psi: 1070 ft.lbs
- Hydraulic motor Rexroth 107 cc / Hydraulic pump Rexroth 100cc
- Ratio: 4.1
- Max speed: 340 rpm
- Max torque at 3000 psi: 1070 ft.lbs
- Max torque at 4000 psi: 1430 ft.lbs
Max load
- 12 100 lbs (5.5 T) @ ISO L10: 25 000 h at 500 rpm / full charge
PR diameter
- 1 1/4'' (31.75 mm) or 1 1/2'' (38.10 mm)