PCM Oil and Gas

Oil & gas peristaltic pumps

With a variety of pump constructions and a wide choice of elastomer hoses, the Delasco™ range from PCM is suitable for use in any application which calls for both heavy duty operation and flexibility.

The DL Series includes a reinforced hose, designed for use with medium pressure applications and the most abrasive, fragile and corrosive fluids.

The DX Series with reinforced hose is designed for medium pressure applications with most abrasive, fragile and corrosive fluids.

The Z Series is the peristaltic pump for low pressure applications.

The PMA Series is the ideal choice for dosing and transferring in low pressure and low flow-rate applications.

Furthermore, these pumps are ATEX certified, so you can rest assured that it meets the latest safety standards.

  • PCM Delasco™ peristaltic pump – DL Series – for oil & gas surface transfer
  • PCM Delasco™ peristaltic pump – Z Series – for oil & gas surface transfer
  • PCM Delasco™ peristaltic pump – PMA Series – for oil & gas surface transfer

Benefits of PCM Delasco™ peristaltic pumps

  • The hose is the only part of the pump which gets worn, resulting in reduced maintenance costs
  • Additionally, the lack of valves and seals means less upkeep is needed
  • Self-priming design
  • The hose pump can handle corrosive and abrasive products such as slurries and viscous materials
  • They can also be used with delicate fluids
  • It is also suitable for use with dry matter and solid particles
  • Peristaltic pumps reduce backflow
  • Dry running is possible without damage occurring

Performances of PCM Delasco™ peristaltic pumps

DL Series

  • Minimum flow-rate: 44 l/h (0.2 USGPM)
  • Maximum flow-rate: 20 m3/h (90 USGPM)
  • Maximum pressure: 15 bar (220 PSI)
  • Maximum temperature in continuous operation: 110 °C (230 °F)
  • Self-priming: 9 m (29 ft) water column suction lift
  • Maximum densities over 2000 kg/m(125 lb/ft3)
  • Maximum viscosity: 40 000 cP

DX Series

  • Minimum flow rate: 3 m3/h (13 USGPM)
  • Maximum flow rate: 55m3/h (242 USGPM)
  • Maximum pressure: 15 bar (220 PSI)
  • Maximum temperature: 110°C (230 °F)
  • Self-priming: 9 m (29 ft) water column suction lift
  • Maximum densities over 2000 kg/m3 (125 lb/ft3)
  • Maximum viscosity: 40 000 cP

​Z Series

  • Minimum flow rate: 40 l/h (0.2 USGPM)
  • Maximum flow rate: 20m3/h (90 USGPM)
  • Maximum peak pressure: 3 bar (45 PSI)
  • Maximum temperature: 120°C (250 °F)
  • Self-priming: 5 m (16 ft) water column suction lift
  • Maximum densities: up to 18000 kg/m3 (112 lb/ft3)
  • Maximum viscosity: 15 000 cP

PMA Series

  • Minimum flow rate: 14l/h (0.06 USGPM)
  • Maximum flow rate: 200l/h (0.9 USGPM)
  • Maximum pressure: 1.5 bar (22 PSI)
  • Maximum temperature: 120°C (250 °F)
  • Self-priming: maximum 5 m (16 ft) water column suction lift
  • Maximum densities over 2000 kg/m3 (125 lb/ft3)
  • Maximum viscosity: 1800 cP